What factors affect the dehumidification effect of industrial dehumidifiers

Time:2022/2/22 14:07:09

When industrial dehumidifiers dehumidify the air, improper operation and use can easily lead to damage. Among the common industrial dehumidifier failures, some are caused by operational errors and misuse, some are caused by environmental impacts, and some are caused by problems with the industrial dehumidifier itself. So what factors will affect the dehumidification effect of industrial dehumidifiers? If the dehumidification effect of industrial dehumidifiers is poor, what should be checked? Next, let’s explain it by the editor of industrial dehumidifier manufacturers, I hope it can be helpful to everyone.

1. Specific factors affecting the dehumidification effect of industrial dehumidifiers:

(1) The air intake filter of the industrial dehumidifier is blocked, the ventilation is poor, and it is difficult for a large amount of humid air in the room to pass through the evaporator, which affects the dehumidification effect of the industrial dehumidifier.

(2) The air outlet is blocked by obstacles, the air circulation will be affected, and the dehumidification effect will be affected. At this time, it is necessary to remove the obstacles of the exhaust port of the industrial dehumidifier or change the position of the industrial dehumidifier to improve the dehumidification effect. Dehumidifying effect.

(3) If the refrigerant of the industrial dehumidifier is insufficient, the direct cooling capacity is insufficient, and the dehumidification effect will be reduced. At this time, it is necessary to add refrigerant to increase the cooling capacity of the industrial dehumidifier.

2. Inspection items when the dehumidification effect is not good:

(1) The cooling system of the industrial dehumidifier is similar to other refrigeration equipment, but if the dehumidification effect is not good due to its characteristics, it may not be the problem of the industrial dehumidifier itself. If the room temperature exceeds 40°C, the industrial dehumidifier often starts and stops; when the industrial dehumidifier is running, the room temperature is too low, causing the machine to freeze, stop defrosting, etc.

(2) Common faults of industrial dehumidifiers include: low voltage, loose sockets, loose wiring, blown fuses, etc., incorrect humidity setting of industrial dehumidifiers, power failure of safety devices of industrial dehumidifiers, incorrect placement of water storage devices, industrial dehumidifiers Freezing after freezing, automatic shutdown of the industrial dehumidifier, etc., so be sure to conduct a comprehensive inspection of the industrial dehumidifier.

The above two points are all about the factors that affect the dehumidification effect of industrial dehumidifiers and the items that need to be checked. Thank you for your understanding and support!