Which parts of the rotary dehumidifier should be checked before use

Time:2022/1/12 10:59:39

The rotary dehumidifier has a large dehumidification capacity, a good dehumidification effect, and a wide range of applications. It is equipped with a fully automatic dehumidification device and is widely used in aerospace, medicine and chemical industry, paper printing, mechanical engineering, food electronics, textile chemical fiber, welding and spraying, wood Products, ports, shipbuilding, civil air defense technology and many other fields. So what parts of the rotary dehumidifier should be checked before use? Next, the editor of the rotary dehumidifier will explain it, I hope it can be helpful to everyone.

1. Air filter: Clean the filter, if the filter is dirty, replace the filter.

2. The overall and casing of the equipment: check whether there is any mechanical damage, and clean the inside and outside of the equipment if necessary.

3. Treatment and regeneration of the fan: Check for mechanical damage, and clean the motor and fan casing if necessary.

4. Wheel drive motor assembly: Check the drive chain for signs of damage and install it correctly.

5. Electrical control panel and wiring: Inspect electrical control panel components and wiring for signs of damage, overheating and loose connections.

6. Regenerative heater: Clean debris and dust from the heater casing.

7. Desiccant guide rail: Check for signs of overheating and blockage, and remove dust from the surface of the guide rail.

8. Packaging: Check for signs of damage and dislocation, if worn or damaged, please replace it in time.

9. Pipe connection: Check for air leakage and normal connection with the equipment.

The above nine points are the entire contents of the nine parts that should be checked before using the rotary dehumidifier. Thank you for your understanding and support!