The dehumidification effect of the rotary dehumidifier is not good, which can be analyzed from three angles

Time:2021/9/29 11:39:56

Many friends find that the humidity does not reach the set value when using the rotary dehumidifier, so there is a question about what to do if the dehumidification effect of the rotary dehumidifier is not good. In fact, if you want to really solve this problem, you can analyze it from three aspects. Next, let the editor of the rotary dehumidifier explain this, I hope it can be helpful to everyone.

1. Whether it cannot be lowered due to incorrect humidity setting

For example, the customer contacted the manufacturer of the spin dryer at the time of purchase. At the beginning, 20-40% is required, but the humidity set in actual use is 10% or even lower, and the normal humidity cannot be lowered. Another possibility is that the cooling temperature in the unit is set too high or the regeneration temperature is set too low, which will also cause the above result.

2. Is it misaligned?

If this is the first operation of a new machine, eliminate the possibility of parameter setting errors and the possibility of poor insulation and sealing. If the relative humidity in the environment cannot be effectively and quickly reduced, it is likely that the unit selected by the manufacturer does not match the current load. The performance of the rotary dehumidifier is affected by many factors. Among them, the runner parameters are determined by the runner manufacturer. The dew point temperature of the purified air after dehumidification is an important parameter for control.

3. Is there a lack of maintenance?

If the new rotary dehumidifier performs well in the early stages of use, its performance will gradually decline, which will shorten the life of the impeller. This situation is mainly caused by the lack of proper maintenance.

The above three points are all about the solution to the poor dehumidification effect of the rotary dehumidifier. Thank you for your understanding and support!