What methods are used to install the various parts of the ceiling dehumidifier

Time:2021/8/24 15:39:20

Ceiling dehumidifiers basically use fans to draw moist air into the machine. Frost is formed after the interaction of the refrigeration system (compressor, evaporator, cooling device). The system automatically heats up, defrosts, melts water and flows into the water tank, and the air is released. This cycle reduces the indoor humidity, and the humid space gradually reaches a dry effect. So how to install the various parts of the ceiling dehumidifier? Next, let the editor of the ceiling dehumidifier explain it.

1. Universal joint installation: After accurately setting the agreed installation position with chalk and measuring tools, use a drill to drill at the specified position and install expansion screws. The screw specification is at least M8.

2. Install the clothes dryer: Before installing the clothes dryer, you must install the four sets of M8 and M1 nuts + spring washers + flat washers on the four isolation screws, and then move the dryer horizontally upwards, penetrating the isolation screws . Put the dryer into the faucet, tighten the M2 nut separately, and install the dryer on the expansion screw. Note that the dryer must not be turned over in any way, otherwise the dryer will be damaged.

3. Horizontal installation: After the dehumidifier is installed, by adjusting the M2 fixing nut that can be tested on the level gauge, the body can be placed horizontally, and the dehumidifier can drain normally to avoid the hidden danger of water leakage. Then install the dehumidifier with M1 nut and fix it Ok, so far the desiccant installation is complete.

4. Install the air inlet pipe: the air inlet should be as close to the body as possible, and the height difference between the air inlet and the dehumidifier should be as small as possible. The shorter the intake pipe, the better the dehumidification effect. The upper limit of the intestinal toxicity of the air inlet pipe shall not exceed 1.5m, and it must be closely connected with the air inlet of the dehumidifier (there is no obstruction in front of the air inlet).

5. Install the air outlet pipe: the distance between the air outlet and the body should be as large as possible, but the upper limit of the air outlet pipe length should not exceed 5 meters, the height difference of the air outlet of the dehumidifier should be as small as possible, and the outlet of the air dryer Must be closed (no obstructions in front of the air outlet).

6. Drain pipe installation: The ceiling-mounted dehumidifier should be 5-10 cm higher than the drain pipe, and the drain hose should not exceed 100 cm. Ensure that the drain pipe is not blocked.

The above six points are all about the installation methods of each part of the ceiling dehumidifier. Thank you for your understanding and support!